The design of doors Berislav

The front door of the company "Berislav" structurally consists of a door leaf and frame

The door leaf consists of a metal frame trimmed with solid oak laminated MDF or chipboard. Depending on the style door trim can be used in triple-pane windows and decorative grilles. Door leaf thickness of 77-80 mm. Metal frame made of steel sheet thickness 1.8 mm reinforced ribs inside the contour and tying channels. The internal cavity is filled with heat and sound insulation fabric type mineralovatoy ISOVER, ROCKWOOL.

The door frame - welded construction of steel tselnognutyh profiles. The inner cavity is filled with the same material as the sheet and strip from the closed obshivnoy ribs. On the face of the door sides and the top fabric to the box set frames.

The door leaf is attached to the box with two or three loops. The hinges are made on ball bearings, which ensures easy opening doors. In order to avoid opening the door by removing the loops in the design side door hinge provides 4 or 8 antisrezov.

Tightness of the closing doors provide two special seal "E" - and "P" - shaped.

Mounting the box into the opening by eight anchor bolts 10 mm and a length of 150-250 mm.

Metalwork and paintings box pretreated and primed and then painted with two component paint company HAMMERITE (England). The threshold of the door when it may be just under the paint, or close an additional threshold of stainless steel or brass.

On the door locks installed and distributors firms "The Guardian», «MOTTURA», or locks customers. Number of points of locking can be from one to four. On the locks installed bronenakladki, which prevents them from drilling.

On the style front doors of the categories you can find in the catalog section of our website.